Table of Contents
Advertisement
Emulation Adapter
2. Names and Functions of Hardware
This chapter describes the names and functions of each part of the emulation adapter and of the other
items included with it. You can avoid damaging the product and affecting the system by reading this
chapter with reference to the actual hardware.
Chapter 3 shows a list of the settings of hardware according to the system configuration (type of
usage).
2.1
Emulation Adapter (RTE7702200EAB00000J)
An emulation adapter is an emulation board on which the debug chip is mounted. Using the emulation
adapter with the exchange adapter allows connection to the target system. The emulation adapter can
also be used as a simple evaluation board in combination with the attached base board.
(4) JP12
(3) CN2
(2) CN1
(1) IC1
(18) JP13
(17) X1
(16) JP8
(15) JP6
(14) JP7
(13) JP1
(19) Pin 1
Figure 2-1
Names of the Parts of the Emulation Adapter (RTE7702200EAB00000J)
(1)
Debug chip: IC1
IC1 is the debug chip (R7F702Z19AEDBG), which can emulate target devices of the RH850/U2A.
R20UT4569EJ0110 Rev. 1.10
Sep.15.23
Top view
Names and Functions of Hardware
(5) LED
(6) JP5
(7) JP10
(8) JP9
(9) JP3
(10) JP2
(11) JP11
(12) JP4
(20) Interfaces for the exchange adapter
Bottom view
Page 5 of 58
Advertisement
Table of Contents
