Renesas RTE7702012EAB00000J User Manual
  1. Manuals
  2. Brands
  3. Renesas Manuals
  4. Adapter
  5. RTE7702012EAB00000J
  6. User manual
Renesas RTE7702012EAB00000J User Manual

Renesas RTE7702012EAB00000J User Manual

Emulation adapter for the rh850/e2uh and e2h groups
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Cover
Emulation Adapter for the RH850/E2UH and
E2H Groups
RTE7702012EAB00000J
All information contained in these materials, including products and product specifications,
represents information on the product at the time of publication and is subject to change by
Renesas Electronics Corp. without notice. Please review the latest information published by
Renesas Electronics Corp. through various means, including the Renesas Electronics Corp.
website (http://www.renesas.com).
www.renesas.com
User's Manual
Rev. 1.10 Nov 2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RTE7702012EAB00000J and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Renesas RTE7702012EAB00000J

Summary of Contents for Renesas RTE7702012EAB00000J

  • Page 1 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Electronics Corp. without notice. Please review the latest information published by Renesas Electronics Corp. through various means, including the Renesas Electronics Corp.
  • Page 2 11. This document shall not be reprinted, reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.

  • Page 3: Preface

    Preface The emulation adapter is an emulation board which is designed for use with RH850 family MCUs from Renesas Electronics Corporation. All components that come with the emulation adapter are listed under “1.1 Package Components”. If you have any questions about the emulation adapter, contact your local distributor.

  • Page 4: Important

    (2) In no event shall Renesas Electronics Corp. be liable for any consequence arising from the use of this product. (3) Renesas Electronics Corp. strives to provide workarounds for and correct trouble with products malfunctions, with some free and some incurring charges.
  • Page 5 Renesas or to a third party. (3) This user’s manual and this product are copyrighted, with all rights reserved by Renesas. This user’s manual may not be copied, duplicated or reproduced, in whole or part, without prior written consent from Renesas.

  • Page 6: Precautions For Safety

    Precautions for Safety This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read and understand this chapter before using this product. Contact your local distributor if you have any questions about the precautions described here.
  • Page 7 WARNING Warnings for AC Power Supply: Do not repair or remodel the emulator product by yourself in order to prevent danger such as an electric shock or fire and for the sake of quality assurance. For after-sale services in case of a mechanical or electrical fault, please contact your local distributor. Always switch off the user system before connecting or disconnecting any connectors or cables.
  • Page 8 WEEE must be treated, recycled and disposed of in an environmentally sound manner. Renesas Electronics Europe GmbH can take back end of life equipment, register for this service at “http://www.renesas.eu/weee”.

  • Page 9: Table Of Contents

    Package Components ........................... 11 Product Specifications..........................12 Regulatory Compliance Notices ........................13 2. Names and Functions of Hardware ..................15 Emulation Adapter (RTE7702012EAB00000J) ................... 15 Base Board (RTE7702012EABBB000J) ....................20 34-Pin to 14-Pin Conversion Adapter (RTE0T00020KCA30000J) ............. 25 Power-Supply Cable ............................ 26 Demounting Lever ............................

  • Page 10: Terminology

    Terminology Some specific words used in this user's manual are defined below. Target device This means the device to be emulated or debugged. Debug chip This means the device that emulates the operation of the target device and implements debugging facilities such as tracing.

  • Page 11: Outline

    Emulation Adapter Outline 1. Outline This product is an emulation adapter for the RH850/E2UH and E2H groups of MCUs from Renesas Electronics Corporation. Using this product with the separately sold exchange adapter enables emulation of the target device. Features: •...

  • Page 12: Product Specifications

    Emulation Adapter Outline Product Specifications Table 1-2 lists the specifications of this product. Table 1-2 Product Specifications Item Specification Device to be emulated 468-pin BGA: RH850/E2UH 468-pin BGA: RH850/E2H 373-pin BGA: RH850/E2H Power supply for the emulation adapter 4.5 V min., 5.0 V typ., 5.5 V max. External dimension Emulation adapter: 47 mm x 51 mm Base board: 100 mm x 120 mm...

  • Page 13: Regulatory Compliance Notices

    • Authorised representative & Manufacturer Name: Renesas Electronics Corporation Address: TOYOSU FORESIA, 3-2-24, Toyosu, Koto-ku, Tokyo, 135-0061, Japan • Person responsible for placing on the market Name: Renesas Electronics Europe GmbH Address: Arcadiastrasse 10, 40472 Dusseldorf, Germany • Trademark and Type name Trademark: Renesas...
  • Page 14 Emulation Adapter Outline FCC Certifications: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

  • Page 15: Names And Functions Of Hardware

    (11) Interfaces for the exchange (1) IC1 adapter Figure 2-1 Names of the Parts of the Emulation Adapter (RTE7702012EAB00000J) (1) Debug chip: IC1 IC1 is the debug chip (R7F702Z10AADBG), which can emulate target devices of the RH850/E2UH and E2H groups.
  • Page 16 CN1 is a connector for connection to emulators which support Aurora tracing, such as the IE850A emulator (type name: RTE0T0850AKCT00000J) from Renesas. CN1 is a 34-pin connector from SAMTEC, the type name of which is ASP-137973-01. The table below lists the pin assignments.
  • Page 17 Emulation Adapter Names and Functions of Hardware CAUTION Unlocking the connector: Do not press the tabs for unlocking the connector too hard as this may lead to them being stuck in this position. Take care on this point. (4) Clock socket: X1 X1 is the socket for the main oscillator.
  • Page 18 Emulation Adapter Names and Functions of Hardware (7) Jumper blocks: JP4 (EMUVCC) and JP5 (EMUVDD) JP4 (EMUVCC) JP5 (EMUVDD) Specification Open-circuit Open-circuit Setting prohibited. EMUVCC = OFF, EMUVDD = always ON Open-circuit 1-2 short-circuit Setting prohibited. EMUVCC = OFF, EMUVDD = ON: Operation is with VCC. Open-circuit 2-3 short-circuit EMUVCC = OFF, EMUVDD = OFF...
  • Page 19 Emulation Adapter Names and Functions of Hardware (10) Status LEDs Name of LED Specification POWER Illuminated: CN2 is supplying power. Not illuminated: CN2 is not supplying power. EMUVCC Illuminated: EMUVCC = ON Not illuminated: EMUVCC = OFF EMUVDD Illuminated: EMUVDD = ON Not illuminated: EMUVDD = OFF (11) Interfaces for the exchange adapter: CN10, CN11, CN12, and CN13 These connectors are used to connect an exchange adapter or the base board.

  • Page 20: Base Board (Rte7702012Eabbb000J)

    Emulation Adapter Names and Functions of Hardware Base Board (RTE7702012EABBB000J) The base board allows use as a simple target system in combination with the emulation adapter. The signals to or from each pin of the debug chip are brought out on CN1 to CN8 on the board, which enables simple checking.
  • Page 21 Emulation Adapter Names and Functions of Hardware (2) Switch: SW1 (POWER SW) SW1 (POWER SW) Specification This switch turns on the power supply of the base board. Turn this switch on after connecting the emulation adapter and starting the supply of power from CN2 of the emulation adapter. (default) This switch turns off the power supply of the base board.
  • Page 22 Emulation Adapter Names and Functions of Hardware CAUTION Operating the switch: Do not operate a switch before removing static electricity from the operator’s body. Doing so may lead to the discharge of static electricity and so damage the internal circuits. (4) Status LEDs: LED1 (3.3 V) and LED2 (5 V) Name of LED Specification...
  • Page 23 Emulation Adapter Names and Functions of Hardware Each jumper block has common specifications as shown in the following table. JP12 to JP16 Specification Open-circuit The target power-supply voltage is off. 1-2 short-circuit 5 V is supplied as the target power-supply voltage. (default) 2-3 short-circuit 3.3 V is supplied as the target power-supply voltage.
  • Page 24 Emulation Adapter Names and Functions of Hardware (9) Pin headers for controlling and monitoring the pins of the debug chip (CN1 to CN8) Figure 2-3 shows the assignment of pin headers for each pin of the debug chip. 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 30 GND 29 P02_10 P02_9 P02_8 P20_7 P20_6 P20_5...

  • Page 25: 34-Pin To 14-Pin Conversion Adapter (Rte0T00020Kca30000J)

    E2 emulator (type name: RTE0T00020KCE00000R) from Renesas and flash programmers that support the 14-pin connector. The following shows pin assignments of CN2. Read the user's manual for the emulator you will be using and connect the emulator with this connector.

  • Page 26: Power-Supply Cable

    Emulation Adapter Names and Functions of Hardware Power-Supply Cable The power-supply cable (about 300-mm long) supplies power to the emulation adapter. (3) J2 (1) CN1 (4) Tabs for unlocking the connector (2) J1 Figure 2-5 Names of the Parts of the Power-Supply Cable (1) Connector: CN1 CN1 is a connector (LEAR-02V-S from JST) for connection to CN2 of the emulation adapter.

  • Page 27: Demounting Lever

    Emulation Adapter Names and Functions of Hardware Demounting Lever The demounting lever which comes with this product is used to remove the emulation adapter from the base board or exchange adapter. Side view Top view The four positions for applying the demounting lever Figure 2-6 Demounting Lever To remove the emulation adapter from the base board or exchange adapter, insert the demounting lever alternately...

  • Page 28: System Configuration And Setup

    Emulation Adapter System Configuration and Setup 3. System Configuration and Setup The system configurations of this emulation adapter are as follows according to your intentions in using it. • A simple evaluation board (See section 3.1.) • An emulation board (See section 3.2.) System Configuration as a Simple Evaluation Board Figure 3-1 shows a system configuration when the emulation adapter is connected to the base board for use as a simple evaluation board.
  • Page 29 Emulation Adapter System Configuration and Setup 3.1.1 Settings for Use as a Simple Evaluation Board Table 3-1 and Table 3-2 show lists of the recommended settings for this system configuration. Table 3-1 Settings for Use as a Simple Evaluation Board (Emulation Adapter) Item Description Debug chip: IC1...
  • Page 30 Emulation Adapter System Configuration and Setup 3.1.2 Procedure for Setting the Emulation Adapter up as a Simple Evaluation Board This section describes the procedure for setting the emulation adapter up for use as a simple evaluation board. (1) Settings on the boards Make settings for the emulation adapter and base board according to the statements in section 3.1.1.
  • Page 31 Emulation Adapter System Configuration and Setup (6) Turning on the emulation adapter and base board and releasing a reset Output 5 V from the power-supply unit that is connected to the power-supply connector (CN2) of the emulation adapter and turn the switch (SW1; POWER SW) of the base board on. Then, set SW2 (RESET SW) for the high level.
  • Page 32 Emulation Adapter System Configuration and Setup 3.1.3 Procedure for Closing a Session of Use as a Simple Evaluation Board This section describes the procedure for closing a session of using the emulation adapter as a simple evaluation board. (1) Closing the debugger (only if you are using an emulator) Close the debugger.

  • Page 33: System Configuration As An Emulation Board

    Emulation Adapter System Configuration and Setup System Configuration as an Emulation Board Figure 3-2 shows a system configuration when the emulation adapter is to be connected to the exchange adapter then connected to a target board (the base board is not used). For the specifications of the exchange adapter, refer to appendix A, Specifications of the Exchange Adapter.
  • Page 34 For the BGA packages, the BSSOCKET target connectors, CSSOCKET space adapters, and LSPACK mounting adapters can be purchased from Tokyo Eletech Corporation. The exchange adapters can be purchased from Renesas Electronics Corporation. If you particularly require details on the CSSOCKET space adapter, contact Tokyo Eletech Corporation.
  • Page 35 Emulation Adapter System Configuration and Setup 3.2.2 Settings for Use as an Emulation Board Table 3-4 and Table 3-5 show lists of the recommended settings of the emulation adapter in this system configuration. For the settings when the power is supplied from CN2, refer to Table 3-4. If the power is not supplied from CN2, the settings in Table 3-5 are also required.
  • Page 36 Emulation Adapter System Configuration and Setup Table 3-5 Settings for Use as an Emulation Board when the Power is not to be Supplied from CN2 Item Description Debug chip: IC1 Set an option byte. Refer to section 4.1. Connector for external tracing: When an emulator is in use: Connect the cable for the emulator or the 34- pin to 14-pin conversion adapter.
  • Page 37 Emulation Adapter System Configuration and Setup CAUTION Connecting the exchange adapter: Connect the exchange adapter to the target system by aligning the positions of pin 1 of the target connector and of the exchange adapter and confirming that the contact pins of the exchange adapter are not bent.
  • Page 38 Emulation Adapter System Configuration and Setup 3.2.4 Procedure for Closing a Session of Use as an Emulation Board This section describes the procedure for closing a session of using the emulation adapter as an emulation board. (1) Closing the debugger (only if you are using an emulator) Close the debugger.

  • Page 39: Notes

    Emulation Adapter Notes 4.Notes Setting Option Bytes Although the specifications of the option bytes of the debug chip which is mounted on the emulation adapter are the same as those of the target device, the actual settings at the time of shipment may differ. Specify appropriate values for the option bytes of the debug chip according to the user’s manual for the target device.
  • Page 40 Emulation Adapter Notes 4.2.3 Power-Supply Voltages The debug chip mounted on the emulation adapter basically operates with the power supplied from the target system. However, note that there are differences in the following power-supply voltages. • EMUVDD and EMUVCC are generated on the emulation adapter. •...

  • Page 41: Characteristics Of Target Interface

    Emulation Adapter Characteristics of Target Interface 5. Characteristics of Target Interface The target interface behaves as if the actual device is connected in terms of functionality. However, in terms of characteristics, the behavior of the target interface sometimes differs from the behavior when the actual device is connected.

  • Page 42: Maintenance And Warranty

    Failure or damage attributable to modifications, repairs, adjustments, or other acts in relation to the product by parties other than Renesas Electronics Corp. (3) Consumables (e.g., sockets and adaptors) are beyond the scope of repair and replacement.

  • Page 43: How To Request Repairs

    How to Request Repairs If your product is found faulty, fill in a Repair Request Sheet downloadable from the following URL and email the sheet and send the product to your local distributor. http://www.renesas.com/repair CAUTION Note on Transporting the Product:...

  • Page 44: Appendix A Specifications Of The Exchange Adapter

    Emulation Adapter Appendix A Specifications of the Exchange Adapter Appendix A Specifications of the Exchange Adapter Overview An exchange adapter is an adapter board that connects the emulation adapter to the pad pattern for the target device. The following describes the specifications of the RTE7702012CBG468T000J exchange adapter for the 468-pin BGA package and the RTE7702011CBG373T000J exchange adapter for the 373-pin BGA package.
  • Page 45 Emulation Adapter Appendix A Specifications of the Exchange Adapter Figure A-1 Connecting the Emulation Adapter R20UT4460EJ0110 Rev. 1.10 Page 45 of 53 Nov. 01, 2019...
  • Page 46 Emulation Adapter Appendix A Specifications of the Exchange Adapter Dimensions Figure A-2 Dimensions of the RTE7702012CBG468T000J (468 pins) Figure A-3 Dimensions of the RTE7702011CBG373T000J (373 pins) R20UT4460EJ0110 Rev. 1.10 Page 46 of 53 Nov. 01, 2019...
  • Page 47 Emulation Adapter Appendix A Specifications of the Exchange Adapter Drawing of the assembly Unit: mm Figure A-4 Drawing of the Assembly for the RTE7702012CBG468T000J (468 pins) Unit: mm Figure A-5 Drawing of the Assembly for the RTE7702011CBG373T000J (373 pins) R20UT4460EJ0110 Rev. 1.10 Page 47 of 53 Nov.
  • Page 48 Emulation Adapter Appendix A Specifications of the Exchange Adapter Characteristics of the target interface Figure A-6 Equivalent Circuit R20UT4460EJ0110 Rev. 1.10 Page 48 of 53 Nov. 01, 2019...
  • Page 49 After use the equipment cannot be disposed of as household waste, and the WEEE must be treated, recycled and disposed of in an environmentally sound manner. Renesas Electronics Europe GmbH can take back end of life equipment, register for this service at “http://www.renesas.eu/weee”.

  • Page 50: Revision History

    Revision History Emulation Adapter for the RH850/E2UH and E2H Groups Revision History User’s Manual Rev. Date Description Page Summary  1.00 Dec 01, 2018 First Edition issued 1.10 Nov 01, 2019 11,15 The type name of debug chip was changed from R7F702Z10ADBG to R7F702Z10AADBG.
  • Page 51 Colophon Emulation Adapter for the RH850/E2UH and E2H Groups User’s Manual Publication Date: Rev.1.00 Dec 01, 2018 Rev.1.10 Nov 01, 2019 Published by: Renesas Electronics Corporation...
  • Page 52 SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics Corporation TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan Renesas Electronics America Inc. 1001 Murphy Ranch Road, Milpitas, CA 95035, U.S.A. Tel: +1-408-432-8888, Fax: +1-408-434-5351 Renesas Electronics Canada Limited...
  • Page 53 Back Cover Emulation Adapter for the RH850/E2UH and E2H Groups RTE7702012EAB00000J User’s Manual R20UT4460EJ0110...

Table of Contents