Renesas R0E000010CKZ00 User Manual

R0E000010CKZ00
14-Pin to 38-Pin Conversion Adapter for the E1 Emulator
1. Outline
The R0E000010CKZ00 adapter is used to connect the 14-pin
2.54-mm pitch connector on the head of the E1-specific user-
system interface cable to 38-pin 0.5-mm pitch connectors.
Using this conversion adapter allows connection of the E1
even if your system only has the 38-pin connector for the E20.
2. Package Components
Before using this product, confirm that the R0E000010CKZ00
package contains the following items.
(1) R0E000010CKZ00 conversion adapter....................... 1 pc.
(2) R0E000010CKZ00 user's manual (this document)
3. Specifications
Table 1 Specifications
Item Description
HTST-107-01-T-DV-P-TR
Upper connector (manufactured by Samtec, Inc.)
(CN1)
Guaranteed number of times for
insertion and removal: 50
5767007-8
(manufactured by Tyco Electronics
Lower connector
Corporation)
(CN2)
Guaranteed number of times for
insertion and removal: 50
4. Usage (See Figure 2)
The R0E000010CKZ00 is connected between the 14-pin
connector on the head of the user-system interface cable (for
the E1) and a 38-pin connector on the user system as shown
in figure 2.
5. Restrictions
The R0E000010CKZ00 allows connection of the E1 to a user
system on which the only mounted connector is for the E20.
However, the only available functions are those of the E1.
Functions specific to the E20 are not available.
REJ10J2122-0100 Rev.1.00
Apr. 01, 2010
Figure 1 External View of the R0E000010CKZ00
CN1
CN2
Pin 38
Pin 2
Figure 2 Usage of the R0E000010CKZ00
User's Manual
REJ10J2122-0100
Rev.1.00
Apr. 01, 2010
User-system interface cable for
the E1 (R0E000010KCE00)
14-pin to 38-pin conversion
adapter (R0E000010CKZ00,
i.e. this product)
38-pin connector on the user
system (2-5767004-2:
manufactured by Tyco
Electronics Corporation)
User system
Page 1 of 4