Menu Configuration And Operations; Displaying The Menu Screen And Sub-Menu Screens; To Restore Menu Setting Items To Their Initial Values - Sanyo DSR-M810PA Instruction Manual

MENU CONFIGURATION AND OPERATIONS

This section describes the menu configuration, and which
menu item to select for each operation.
Displaying the menu screen and sub-
menu screens
[MENU] button [ ] button
[ ] button
1
Press the [MENU] button.
The <MAIN MENU> screen appears.
2
Press the [ ] or [
the desired menu.
When you move the cursor, the selected item is displayed
in reverse.
3
Press the [ ] button.
The selected sub-menu appears.
The cursor is positioned on the first setting item.
[ ] button
[EXIT/OSD] button
] button to select
24
To exit a menu screen
4
Press the [EXIT/OSD] button.
The display returns to the normal screen.
While recording, you can display menu screens but
cannot change menu settings.
Entering settings in sub-menu screens
In the sub-menu screen, use the [
buttons to enter the desired setting.
(2)
(1)
(1) To move the cursor up/down
Press the [ ] or [ ] button.
(2) To move the cursor right or to a setting item
Press the [ ] or [
(3) To change a setting value
Press the [ ] or [ ] button.
To restore menu setting items to their
initial values
Follow the steps below to restore just the currently
displayed menu items to their initial values.
1
Display the desired sub-menu screen.
2
Press the [MENU RESET] button.
The displayed settings are restored to their initial values.
[MENU RESET] button
] [ ] [ ] [ ]
(3)
] button.
English