Setting The User Password - Sanyo DSR-M810PA Instruction Manual

5 SECURITY LOCK SET
3
Press the [
The first password entry bar "-" flashes.
4
Press the [ ] and [
the character to enter.
Example:
Selecting "1"
5
Press the [
The second password entry bar flashes.
6
Use the same procedure to enter the
remaining digits ("23456AB" in this
example).
To set a 4-digit password
When you have entered four digits, and the fifth
password entry bar is flashing, press the [
7
When you have entered the password,
press the [
The cursor moves to "OFF" (flashing).
8
Press the [ ] and [
"ON".
If you select "OFF" for the "ADMIN" setting, you can't
set the "USER" password.
9
When you have finished making the
setting, press the [
The cursor moves to "USER".
If you don't want to set a user
password, the password
setting is now finished.
Press the [ ] button to
move the cursor to "REC CONTROL", to set the
authorization for recording and playback operation. ( P.38)
English
] button.
] buttons to select
] button.
] button.
] button.
] buttons to select
] button.

Setting the user password

Example: Setting "AB123456"
1
Press the [
the cursor to "USER".
2
Press the [
The first password entry bar "-" flashes.
(Example: A)
Press the [ ] and [
3
Press the [
The second password entry bar flashes.
Press the [ ] and [
Use the same procedure used to set the password to enter
the remaining digits.
4
When you have finished making the
setting, press the [
The cursor moves to "OFF" (flashing).
5
Press the [
"ON", then press the [
The cursor moves to "REC CONTROL".
37
] and [ ] buttons to move
] button.
] buttons to select "A".
] button.
] buttons to select "B".
] button.
] and [ ] buttons to select
] button.