Epson ActionNote 650 User Manual page 79

Hide thumbs Also See for ActionNote 650:

Table of Contents

8. Remove the screw directly above the VGA port that secures

the CPU heat spreader to the computer. Then lift out the

heat spreader and set it aside. (This screw is created

exclusively for the CPU heat spreader, so keep it with the

heat spreader until you replace it.)

Note

There is a plastic pad that adheres to the CPU or to the

heat spreader. Do not remove this pad. If it adheres to

the heat spreader, make sure it aligns with the CPU

when you replace the heat spreader in the steps below.

Installing Optional

4-11

Devices

Table of Contents

Actionnote 650c Actionnote 660c