Epson ActionNote 650 User Manual page 83

8. To disconnect the cable from the drive, grasp the clear
plastic pull strap and carefully pull it straight out from the
drive connector. (You may need to lift up the drive slightly
to pull out the cable connector.) Be sure to pull evenly
along the width of the strap so you do not bend any of the
pins in the drive connector.
9. Then lift the drive out of the computer.
Note
The hard disk drive compartment on your computer can
accommodate drives up to 19 mm high. The drive that
comes with your computer is 12.5 mm, 15.5 mm, or
19 mm high. 12.5 mm and 15.5 mm drives come with a
spacer underneath them. If you are going to install a
drive that is more than 15.5 mm high, remove the spacer
from the compartment before you perform step 10.
Installing Optional Devices
4-15