Epson ActionNote 650 User Manual page 102

5. If you inserted a RAM or hard disk card, did you format it?
Like a diskette, a new RAM or hard disk PC card may need
to be formatted (initialized) before you can use it. See the
documentation that came with the card for instructions.
6. Are you using a LAN PC card with the power management
features enabled or running only on battery power? You
should disable the power management features when you
are using the computer on a network because these features
can interfere with your network software. Also be sure to
connect the AC adapter when you use a LAN PC card
because these cards consume a lot of power.
7. Is your PC card compatible with the ActionNote? The PC
card slots in your computer support PCMCIA version 2.1
or earlier and accept up to two Type I or II cards, or one
Type III card. If you aren't sure your card is compatible, call
the EPSON Connection to ask about tested cards.
8. Did you run the MS-DOS MEMMAKER utility or load a
memory manager (such as MS-DOS EMM386.EXE)? If so,
you must ensure that these programs do not interfere with
the memory addresses and other settings used by your
PCMCIA drivers by editing your CONFIG.SYS file. See the
EPSON Card and Socket Services User's Guide for more
information.
5-16
Troubleshooting