Step 2:
Assembly of the Upright Supports and Joint Tubes, part 2
1.
Slide on two oval end caps (8) on the feet of the upright support (1).
2.
Mount the right joint tube (4) along with one reinforcement plate (5) to the upright support (1)
with two screws (11), four washers (12) and two locknuts (13).
3.
Slide the right joint tube (4) into the left joint tube (3).
4.
Connect the joint tubes (3 & 4) with one fast pin (10).
5.
Tighten all screw joints.
13
12
12
11
13