Installation - HIKVISION DS-2CE12KF0T-LFS User Manual

1.2.3 Overview of Type III Camera
Enclosure
Base

Installation

Plate
Figure 1-3 Overview of Type III Camera
Notes:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS
1.2.4 Overview of Type IV Camera
Enclosure
Figure 1-4 Overview of Type IV Camera
Notes:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS
1.2.5 Overview of Type V Camera
Switch Button
Power Cord
Video Cable
Figure 1-5 Overview of Type V Camera
Notes:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS
2 Installation
Before you start
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with

your power output to avoid damage.
Make sure the wall is strong enough to withstand

three times the weight of the camera and the mount.
Base
Base
Microphone
Main Body
Set Screw
Main Body
Microphone
Installation Plate
Microphone
Switch Button
Power Cord
Video Cable
Switch Button
Power Cord
IN DC12V
Video Cable
Enclosure
Main Body