HIKVISION DS-2CE12KF0T-LFS User Manual page 12

PA4 × 10
Figure 2-10 Fix the Camera to the Junction Box
 For Type IV and Type V camera:
Figure 2-11 Fix the Camera to the Junction Box
7. Route the cables through the bottom cable hole or
the side cable hole of the junction box.
8. Refer to Step 5 of Section 2.2.1 to adjust the angle
and finish the installation.
2.2.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Ø10 mm screw holes in the wall where you
want to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
3. Fix the base/installation plate to the wall mount.
 For Type III and Type V camera:
i. Use three PM4 screws to fix the installation plate
onto the wall mount.
Junction Box Cover
Installation Plate
PA4 × 25
Junction Box Cover
Installation Plate/Base
Figure 2-12 Fix the Wall Mount
PM3 × 13
M4 × 10