Table of Contents
Advertisement
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system.
Figure 17. Removing the system cover
Next steps
Replace the system
cover.
Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. Follow the procedure listed in
Before working inside your
system.
3. Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system.
2. Close the system cover release latch.
3. Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the lock clockwise to the lock position.
Installing and removing system components
29
Advertisement
Table of Contents
