Related Manuals for HULALA HOME SBHM0785
Summary of Contents for HULALA HOME SBHM0785
- Page 1 HULALA ITEM NO.SBHM0785 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference. 01/27...
- Page 2 MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time.
-
Page 3: Explosive View
EXPLOSIVE VIEW 2PERSONEN OVERVIEW 03/27... -
Page 4: Parts List
PARTS LIST 04/27... -
Page 5: Hardware List
HARDWARE LIST 3.5*14mm*7# 3*15mm*7# ∅ ∅ HARDWARE SPARE LIST 05/27... -
Page 6: Tool List
HARDWARE LIST 3.5*19mm*7# 1/4*1-3/4" ∅ ∅ 3*35mm*7# ∅ 8*30mm ∅ TOOL LIST 06/27... - Page 7 ASSEMBLY INSTRUCTIONS STEP-1 Use screw#15 to attach clump weight(N) to the reverse side of bottom panel(B)，the position is behind the bottom panel(B) as picture show,tighten screw#15 with screwdriver#17. Attention: The word "back"in the picture refers to the direction of bottom panel(B) with backpanel slot.
- Page 8 ASSEMBLY INSTRUCTIONS STEP-2 Use bolt #4，spring washer #6 and plat washer #5 to attach leg (L) to part (B),make sure all holes aligned ，tighten bolt #4 with allen key #16. #16 x1 1/4*1-3/4" ∅ 08/27...
- Page 9 ASSEMBLY INSTRUCTIONS STEP-3 Screw leg (M) into the corresponding hole of part (B) with hand as picture show. 09/27...
- Page 10 ASSEMBLY INSTRUCTIONS STEP-4 Insert panel (D)&(E) into the corresponding hole of part (B) ,make sure all holes aligned and tighten it with allen key #16. 10/27...
- Page 11 ASSEMBLY INSTRUCTIONS STEP-5 Insert panel (C) into the corresponding hole of part (B) ,make sure all holes aligned and tighten it with allen key #16. 11/27...
- Page 12 ASSEMBLY INSTRUCTIONS STEP-6 Use screw #3 to attach part #9 to top panel (A),make sure all holes aligned and tighten screw #3 with screwdriver #17. 3.5*19mm*7# ∅ 12/27...
- Page 13 ASSEMBLY INSTRUCTIONS STEP-7 Insert top panel (A) into the preassemble step 5,make sure all holes aligned and tighten it with allen key #16. 13/27...
- Page 14 ASSEMBLY INSTRUCTIONS STEP-8 Open the back panel (G), insert back panel (G) into the groove of preassemble step 7, make sure all holes aligned，use screw #2 to attach it and tighten screw #2 with screwdriver #17. 3*15mm*7# ∅ 14/27...
- Page 15 ASSEMBLY INSTRUCTIONS STEP-9 Attention: Before the next step, adjust the feet of the locker to keep it level. 15/27...
- Page 16 ASSEMBLY INSTRUCTIONS STEP-10 Insert shelf holder #10 into the corresponding hole of panel (C)&(D)&(E) and then attach panel (F) to it. Shelf holder can be adjusted up or down 16/27...
- Page 17 ASSEMBLY INSTRUCTIONS STEP-11 Use screw #1 to attach hinge #7 to door (H)&(K),make sure all holes aligned and tighten screw #1 with screwdriver #17. When installing hinge ， please pay attention to distinguish the category of hinge!!!! 3.5*14mm*7# ∅ 17/27...
- Page 18 ASSEMBLY INSTRUCTIONS STEP-12 Move door (K)&(H) to corresponding position of side panel (C)&(D),make sure all holes aligned and use screw #1 to attach them，tighten screw #1 with screwdriver #17. C&D H&K H&K 3.5*14mm*7# ∅ 18/27...
- Page 19 ASSEMBLY INSTRUCTIONS STEP-13 Use screw #1 to attach hinge #8 to door (I)&(J),make sure all holes aligned and tighten screw #1 with screwdriver #17. When installing hinge ， please pay attention to distinguish the category of hinge!!!! 3.5*14mm*7# ∅ 19/27...
- Page 20 ASSEMBLY INSTRUCTIONS STEP-14 Move door (I) to corresponding position of middle vertical panel (E),make sure all holes aligned and use screw #1 to attach them，tighten screw #1 with screwdriver #17. 3.5*14mm*7# ∅ 20/27...
- Page 21 ASSEMBLY INSTRUCTIONS STEP-15 Move door (J) to corresponding position of middle vertical panel (E),make sure all holes aligned and use screw #1 to attach them，tighten screw #1 with screwdriver #17. 3.5*14mm*7# ∅ 21/27...
- Page 22 ASSEMBLY INSTRUCTIONS STEP-16 Rebound adjustment method 22/27...
- Page 23 ASSEMBLY INSTRUCTIONS STEP-17 Concealed hinges are three-way adjustable: Horizontal by screw adjustment! Concealed hinges are three-way adjustable: In-and-out by loosening the hinge arm mounting screw or via cam adjustment! Concealed hinges are three-way adjustable: Vertical via slots in the mounting plate or via cam adjustment! Hinge adjustment method 23/27...
- Page 24 ASSEMBLY INSTRUCTIONS STEP-18 #1 to attach plastic part #11 to back panel (G),tighten screw Use screw #1 with screwdriver #17 . 3.5*14mm*7# ∅ 24/27...
- Page 25 ASSEMBLY INSTRUCTIONS 3*35mm*7# ∅ STEP-19 1. Mark the position on the wall, that corresponds to the location of bracket on the back panel (G); Drill and insert the expandable screw by hammer. 2. Assemble the bracket to the wall. Align the hole in the bracket with the expandable screw , use screw to attach it...
- Page 26 ASSEMBLY INSTRUCTIONS STEP-20 3. Let the plastic belt pass through bracket and pull tightly. 26/27...
-
Page 27: Warranty
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive.
Need help?
Do you have a question about the SBHM0785 and is the answer not in the manual?
Questions and answers