Lionel LionChief Plus 2.0 ET44 Owner's Manual page 20

Using the LionChief Universal Remote
The LionChief Universal Remote continued
WHISTLE / HORN / FRONT COUPLER BUTTON
Press the Whistle / Horn button to activate the horn / whistle. To activate the front coil coupler
on the locomotive press and hold the Announcement button down and, using another finger,
press and release the Whistle/Horn button to activate the front coupler. Then release the
Announcement/Shift button.
BELL BUTTON / REAR COUPLER BUTTON
To turn the bell on, press the bell button one time. To turn the bell off press the button again.
To activate the rear coil coupler on the locomotive press and hold the Announcement button
and, using another finger, press and release the Bell button to activate the rear coupler. Then
release the Announcement/Shift button.
ENGINE SELECTION
1, 2, 3
Each Engine Selection button represents a channel for controlling one LionChief, LionChief
Plus, LionChief Plus 2.0 or Legacy Bluetooth locomotive. Each of these buttons may be
"paired" with a different locomotive. Once paired, you can control multiple locomotives from
one remote by pressing an Engine Selection button, then using the throttle, horn, bell, etc.
Note!
Your remote will remember all locomotive pairings when you turn everything back
on for your next operating session.
THROTTLE
Turn the throttle clockwise slowly to increase speed in the forward direction. Returning the
throttle to the top dead center position will bring the locomotive to a stop. Moving the throttle
counterclockwise will increase the speed of the locomotive in reverse. The Throttle also
functions as the volume control. Refer to "Adjusting the locomotive volume" section in this
manual for more detailed information.
20