AT&T BL103-1K Complete User's Manual page 74

Multiple handset use
Call transfer using intercom
Using the telephone base:
1. When on an outside call, press INT on the
telephone base.
- OR -
When on an outside call, press MENU/
the telephone base, then press
highlight Intercom. Press
2. The call is automatically put on hold. Press
or to select a device. The handset shows
CID DIR
Calling HS X (X represents the handset number).
The destination handset rings and shows Base is
calling.
3. To answer the intercom call on the other device,
HOME/
press
any dialing key (0-9, TONE
destination handset. The outside call is still on
hold. Both devices now show Intercom.
4. To transfer the call, press MENU/
scroll to Transfer, then press
connects to the outside call.
- OR -
The called party can end the intercom call by pressing CANCEL on the
telephone base. The outside call continues with the telephone base.
Notes:
If you want to cancel an intercom call and reconnect to the outside call before the destination handset answers, press
f
OFF/ on the originating handset or press CANCEL on the originating telephone base.
CANCEL
If the called device does not answer the intercom call within 100 seconds, or if the device is in use, on a call or out of
f
range, the initiating telephone base displays No answer, try again, or the initiating handset displays Unable
to call, and returns to the outside call.
You can press OFF/CANCEL or MUTE/
f
telephone base to temporarily silence the intercom ringer.
Only one intercom call can be established at a time.
f
/SELECT .
MENU
CELL, /SPEAKER, or
,
FLASH
or QUIET#) on the
MENU
DELETE
on
SELECT
or to
CID DIR
on the telephone base, and then
SELECT
/SELECT. The other handset automatically
on the destination handset, or press CANCEL on the
68
INTERCOM TO:
HANDSET 1
>
Calling
HANDSET 1