Call Transfer Using Intercom - AT&T BL103-1K Complete User's Manual

Multiple handset use

Call transfer using intercom

While on an outside call, you can use the intercom feature to transfer the call
from one device to another.
To transfer an outside call using intercom:
Using a cordless handset:
1. When on an outside call, press MENU/
2. Press or
CID
/SELECT. The call is automatically put on hold.
MENU
3. Press or
CID
Calling base or Calling HS X (X represents the handset
number). The destination device rings and shows
HS X is calling.
4. To answer the intercom call on the other handset, press
HOME/
FLASH
(0-9, TONE
The outside call is still on hold. Both devices now show
Intercom.
- OR -
To answer the intercom call on the telephone base, press
/HOME,
QUIET#) on the telephone base. The outside call is still on
hold. Both devices now show Intercom.
5. To transfer the call, press
handset back in the telephone base or charger. The other
handset automatically connects to the outside call.
- OR -
The called party can end the intercom call by pressing
OFF/
CANCEL
charger. The outside call continues with the originating handset.
to highlight Intercom, then press
DIR
to select a device. The handset shows
DIR
, CELL, /SPEAKER, or any dialing key
or QUIET#) on the destination handset.
/CELL, or any dialing key (0-9, TONE
OFF/
or by placing the other handset back in the telephone base or
.
SELECT
or place the
CANCEL
67
Home
ECO
10:30
PM
Intercom
ECO
Handset 1
ECO
Calling HS X
ECO
or
10:30
PM
Intercom
ECO
10:30
PM
0:01:30
11/20
11/20
11/20