Special Tools - Yamaha MBK MW125 2014 Service Manual

EAS20012

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use only
the appropriate special tools as this will help prevent damage caused by the use of inappropriate tools
or improvised techniques. Special tools, part numbers or both may differ depending on the country.
When placing an order, refer to the list provided below to avoid any mistakes.
TIP
• For U.S.A. and Canada, use part numbers starting with "YM-", "YU-", or "ACC-".
• For others, use part numbers starting with "90890-".
Tool name/Tool No.
Weight
90890-01084
Weight
YU-01083-3
Slide hammer bolt
90890-01085
Slide hammer bolt 8 mm
YU-01083-2
Crankcase separating tool
90890-01135
Crankcase separator
YU-01135-B
Flywheel puller
90890-01189
Flywheel puller
YM-01189
Rotor holding tool
90890-01235
Universal magneto and rotor holder
YU-01235
Illustration
YU-01083-3
1-14
SPECIAL TOOLS
Reference
pages
5-18
5-18
5-64
5-50
5-39, 5-44, 5-50,
5-51