Table of Contents
Advertisement
3-1
Overview
There are several LEDs on the control panel as well as others on the SATA/SCSI
drive carriers to keep you constantly informed of the overall status of the system
as well as the activity and health of specifi c components. There are also two but-
tons on the chassis control panel. This chapter explains the meanings of all LED
indicators and the appropriate response you may need to take.
3-2
Control Panel Buttons
There are two push-buttons located on the front of the chassis. These are (in
order from left to right) a reset button and a power on/off button.
Reset: Use the reset switch to reboot the system.
Power: The main power switch is used to apply or remove power from the
power supply to the server system. Turning off system power with this button
removes the main power but keeps standby power supplied to the system.
Chapter 3
System Interface
3-1
Chapter 3: System Interface
Advertisement
Table of Contents
