Table of Contents
Advertisement
AS1011M-UR User's Manual
Compact Flash Power
Header
A Compact Flash Card Power header
is located at JWF1. For the Compact
Flash Card to work properly, you will
fi rst need to connect the device's power
cable to JWF1 and correctly set the
Compact Flash Jumper (JCF1).
SGPIO
SGPIO1 (Serial General Purpose
Input/Output) provides a bus between
the SATA controller and the SATA
drive backplane to provide SATA
enclosure management functions.
Connect the appropriate cables from
the backplane to the SGPIO1 header
to utilize SATA management functions
on your system.
Compact Flash
Power Header
Pin Defi nitions (JWF1)
Pin#
Defi nition
1
+5V
2
Ground
3
Signal
SGPIO Header
Pin Defi nitions (SGPIO1)
Pin#
Defi nition
1
NC
3
Ground
5
Load
7
NC
Note: NC indicates no connection.
5-18
Pin #
Defi nition
2
NC
4
Data
6
Ground
8
NC
Advertisement
Table of Contents
