Table of Contents
Advertisement
5-5
I/O Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-2 below for the colors and locations of the various I/O ports.
5-6
Installing Memory
Exercise extreme care when installing or removing memory modules
1. Insert each memory module vertically into its slot, paying attention to the notch
along the bottom of the module to prevent inserting the module incorrectly (see
Figure 2-2). Populate both slots 1A and 1B fi rst. See support information below.
2. Gently press down on the memory module until it snaps into place.
Note: each processor has its own built-in memory controller. 512 MB, 1 GB, and 2
GB memory modules are supported. It is highly recommended that you remove the
power cord from the system before installing or changing any memory modules.
Chapter 5: Advanced Motherboard Setup
Figure 5-2. Rear Panel I/O Ports
CAUTION
to prevent any possible damage.
5-7
Advertisement
Table of Contents
