Server Chassis Features - Supero AS-1011M-UR User Manual

AS1011M-UR User's Manual
1-3

Server Chassis Features

The 1011M-UR uses the SC815TQ-R450U 1U server chassis. The following is a
general outline of the main features of the SC815TQ-R450U chassis.
System Power
The SC815TQ-R450U chassis features a redundant 450W power supply consisting
of two power modules. The system does not need to be shut down when replacing
or removing a single power supply module.
SAS/SATA Subsystem
The SC815TQ-R450U chassis was designed to support four hot-swap SAS or
SATA hard drives.
Control Panel
The SC815TQ-R450U control panel provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activ-
ity, UID and system overheat conditions. Also present are a main power button, a
system reset button and a UID button.
I/O Backplane
The SC815TQ-R450U is a 1U rackmount chassis. Its I/O backplane provides three
standard size PCI slots, one COM port (the other is internal), one VGA port, two USB
ports, PS/2 mouse and keyboard ports, two Ethernet (LAN) ports and a UID LED.
Cooling System
The SC815TQ-R450U chassis has a revolutionary cooling design. The SC815TQ-
R450U includes two heavy duty 10-cm blower fans located in the middle of the chas-
sis. These fans operate continuously at full rpm. An overheat LED will be activated
if they break down and the ambient air temperature inside the chassis rises.
1-4