Supero AS-1011M-UR User Manual page 37

4. With the CPU inserted into the
socket, inspect the four corners of the
CPU to make sure that it is properly
installed and fl ush with the socket.
5. Gently press the CPU socket lever
down until it locks in the plastic tab.
Installing the Heatsink Retention Modules
A heatsink retention module (BKT-0018L) and two screws have been included in
the retail box. Once installed, it is used to help attach the heatsink to the CPU.
To install, position the module so that the CPU backplate standoffs insert through
the holes on the heatsink retention module and the four feet on the module contact
the motherboard. Secure the retention module to the backplate with two of the
screws provided. See Figure 2-1. Note: BKT-0018L is included for use with non-
Supermicro heatsinks only. When installing Supermicro heatsinks, only BKT-0017L
(CPU backplate) is needed. BKT-0018L was designed to provide compatibility with
clip-and-cam type heatsinks from third parties.
Figure 2-1. CPU Heatsink Retention Module Installation
Chapter 5: Advanced Motherboard Setup
5-3