Connecting The Control Panel - Supero AS-1011M-UR User Manual

AS1011M-UR User's Manual

Connecting the Control Panel

JF1 contains header pins for various front control panel connectors. See Figure
5-1 for the pin locations of the various front control panel buttons and LED indi-
cators. Please note that even and odd numbered pins are on opposite sides of
each header.
All JF1 wires have been bundled into single keyed ribbon cable to simplify their
connection. The red wire in the ribbon cable plugs into pin 1 of JF1. Connect
the other end of the cable to the Control Panel printed circuit board, located just
behind the system status LEDs in the chassis.
See the Connector Defi nitions section in this chapter for details and pin descrip-
tions of JF1.
Figure 5-1. Front Control Panel Header Pins (JF1)
OH/Fan Fail/Pwr Fail LED
20 19
Ground NMI
x (key) x (key)
Power LED Vcc
HDD LED UID Button/HDD LED Power
NIC1 Vcc
NIC2 Vcc
UID LED
Power Fail LED Vcc
Ground Reset
Ground Power
2 1
5-6