Removing Optional Module - Dell OptiPlex 7060 Micro Service Manual

2 Install the
a Side cover
b Optional module
3 Follow the procedure in
Optional module

Removing optional module

1 Follow the procedure in
2 Remove the :
a Side cover
b 2.5 inch hard drive assembly
3 To remove the optional card:
a Disconnect the optional-card cable from the connector on the system board [1].
b Remove the four screws that secure the optional card to the system chassis [2, 3].
34 Disassembly and reassembly
After working inside your computer.
Before working inside your computer.