2. Install the:
a.
2.5 inch hard drive assembly
b.
Side cover
3. Follow the procedure in
Optional module
Removing optional module
1. Follow the procedure in
2. Remove the :
a.
Side cover
b.
2.5 inch hard drive assembly
3. To remove the optional card:
a. Disconnect the optional-card cable from the connector on the system board [1].
b. Remove the two (M2X3.5) screws and two screws that secure the optional card to the system chassis [2, 3].
58
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.