Table of Contents
Advertisement
Info level
To enter the Info level, proceed as follows:
1
in any menu position, press keys + and - at the same time, then the program will start again: the display will show OFF.
2
until the display will show InFo, Press the enter (InFo) key
3
then il will show the first code (167) flashing, on the right side it will show the data entered. By pressing + or - it is possible to scroll
(up or down) the parameter list.
4
If a dot-line is shown on the right, there is no enough room for complete visualisation: press enter again the data will be completely
shown for 1 to 3 seconds. By pressing enter or + and- at the same time, the system will exit the parameter visualisation and go
back to the flashing number.
The Info level shows some basic parameters as:
Parameter
Description
167
Cubic meters of fule (resettable)
162
Operating hours (resettable)
163
Device operating hours
164
Burners start-ups (resettable)
166
Total number of start-ups
113
Burner number (i.e. serial number)
107
Software version
102
Software date
103
Device serial number
104
Customer code
105
Version
143
Free
5
Example: choose parameter 102 to show the date
the display shows parameter 102 flashing on the left and characters ._._ on the right.
6
press InFo for 1-3 seconds: the date will appear
7
press InFo to go back to parameter "102"
8
by pressing + / -, it is possible to scroll up/down the parameter list (see table above), or, by pressing ESC or InFo for more seconds,
the display will show
9
Once the last parameter is accessed (143) by pressing + , the End message will flash.
10 Press InFo
for more than three seconds or for more than three seconds orto return to the normal display.
37
PART III: OPERATION
Advertisement
Table of Contents
