Operation - (Display) Settings; Cleaning; Maintenance; Storage / Transport - saro GTK 370 Manual

Table of Contents

Advertisement

Available languages

Available languages

OPERATION - SETTINGS
Digital temperature controller:
Switch on
- Insert the mains plug into the socket. The appliance switches on.
Operation via the display
1. Set temperature:
Press the SET key and the set temperature is displayed. Press the SET key for 4 seconds, the °C starts flashing.
Press the ▲-key or the ▼-key to change the displayed value.
To save the temperature, press the SET button again or wait 10 seconds.
If no other button is pressed within 10 seconds, the set temperature is displayed.
While the unit is cooling, the LED indicator lights up. As soon as the cooling temperature is constant, the LED indicator goes out.

CLEANING

Ensure that the device is turned off. Wipe the exterior and interior surfaces with a damp, soft cloth. A mild dishwashing
detergent can be used if needed. Follow up with a rinse without any cleaning additives, then dry thoroughly. Do not use sharp,
bleaching, corrosive, or abrasive cleaning agents/aid, as they could damage/scratch the surfaces.

MAINTENANCE

To keep the device clean and dry during long-term operation, a special air filter device has been developed. Replace the air
filter located under the device base every 2 months.

STORAGE / TRANSPORT

Ensure the appliance is free of any food, turned off, and unplugged. Thoroughly clean both the interior and exterior of the
appliance, leaving the door open to allow for proper drying.
If the appliance is dry and won't be in use for an extended period, store it in a cool, dry, and dust-free location. Using the original
packaging or covering the unit is recommended to prevent damage.
Take precautions to prevent children and pets from accessing the appliance to avoid potential accidents.
When storing packaging materials, be cautious of components like plastic bags, cardboard, and polystyrene parts, which can be
hazardous to unsupervised children, such as choking hazards.
During transport, it's best to use the original packaging to provide optimal protection against impacts, sharp edges, and weather
conditions. Avoid tilting the unit beyond 45 degrees, exposure to moisture or rain, and minimize exposure to strong vibrations.
Seite 24 von 30
09/23 SvN

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Gtk 700 sdGtk 1065453-1004453-10075453-1019

Table of Contents