Table of Contents
Advertisement
¡ If required, the mains cable must only be replaced
by a qualified electrician. A replacement mains
cable is available from the after-sales service.
¡ Do not use any multiple plugs or multi-connectors
and extension cords.
¡ The earthing system is correctly installed.
¡ If using a residual current device, only use one that
bears the mark
. The presence of this mark is the
only way to be sure that it fulfils all the applicable
regulations.
¡ The mains cable does not come into contact with
heat sources.
22.8 Power cable with protective contact
plug
Connect the appliance only to a correctly installed,
earthed socket.
If the plug can no longer be accessed following install-
ation, provide a separator in the phases in the fixed
electrical installation in accordance with the set-up in-
structions.
22.9 Power cable without protective contact
plug
Only allow a licensed professional to connect the appli-
ance.
Provide a separator in the phases in the fixed electrical
installation in accordance with the construction instruc-
tions. Identify the phase conductor and the neutral con-
ductor (zero conductor) in the socket. An incorrect con-
nection may damage the appliance.
Only connect in accordance with the connection dia-
gram. The information about the voltage can be found
on the rating plate. Connect the wires of the mains
power cable according to the colour coding:
Cable colour
Green-yellow
Blue
Brown
22.10 Securing the appliance
¡ Slide the appliance in fully and centre it.
¡ Screw the appliance into place.
The gap between the worktop and the appliance must
not be closed by additional battens.
Cable type
Earthing cable
Neutral conductor (zero)
Phase conductor (external
conductor)
Do not attach any thermal insulation strips to the side
panels of the surround unit.
To remove:
¡ Disconnect the appliance from the power supply.
¡ Undo the fastening screws.
¡ Lift the appliance slightly and pull it out completely.
Installation instructions en
45
Advertisement
Table of Contents
