Maintenance Instructions; Cleaning The Central Heating Inlet Filter - Baxi LUNA SAT RCZ G1-MB Installation And Operating Manual

For regular and cost-effective operation of the user modules, they must be periodically checked and overhauled appro-
ximately once every two years.
15. CLEANING THE HEATING INLET FILTER
These appliances are fitted with a heating water filter on the water inlet line coming from the centralised plant.
To clean, proceed as follows:
• Close all the on/off taps on the hydraulic connectors of the module;
• Empty the heating circuit;
• Unscrew the cap at the top of the filter, remove the internal cylinder cartridge and eliminate any impurities.
• Remove the by-pass tube if necessary.
CR_0624
Figure 12: Dismounting the heating circuit filter
INSTALLATION AND OPERATING MANUAL

MAINTENANCE INSTRUCTIONS

54
7215037.01 - en