Restore Factory Settings; Water Tank Illumination - Jura 751 Instructions For Use Manual

4 Permanent settings in programming mode

Restore factory settings

Water tank illumination

30
T Press the Rotary Switch to enter the programme item.
'Units'
T Turn the Rotary Switch until
T Press the 'Save'
'Saved' appears briefly on the display.
'Units'
T Press the '  ' button until the start screen is displayed again.
In the programme item
machine can be reset to its factory setting: This resets all user set-
tings to the factory setting. Your Z6 then switches off.
Precondition: The start screen is displayed.
T Press the Rotary Switch.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
T Turn the Rotary Switch until
T Press the Rotary Switch to enter the programme item.
'Factory setting'
tings?'
T Press the 'Yes'
'Saved' appears briefly on the display.
Your Z6 is switched off.
In the programme item
tion' you can change the setting for water tank illumination:
U
'Permanent': The water tank is always illuminated.
U
'Temporary': The water tank is only illuminated when an
action is being performed by the machine.
Example: Proceed as follows to change the water tank illumination
setting from 'Permanent'
Precondition: The start screen is displayed.
T Press the Rotary Switch.
'Maintenance status'
T Turn the Rotary Switch until
'oz' is displayed.
button.
'Machine settings'
'Machine settings'
'Factory setting'
/ 'Reset the machine to the factory set-
button.
'Machine settings'
to 'Temporary'.
'Machine settings'
/ 'Factory setting' the
is displayed.
is displayed.
/ 'Water tank illumina-
is displayed.