Jura 751 Instructions For Use Manual page 25

Product
Two ristretti,
two espressi,
two coffees,
two caffè Barista,
two lungo Barista
Cappuccino
Latte macchiato
Espresso macchiato
Flat white,
caffè latte
Pot of coffee
Portion of milk foam,
milk
Hot water,
hot water for green
tea,
hot water for black
tea
Coffee Amount
strength
– Coffee: The amount set for
the single product is
doubled.
10 levels Coffee: 25 ml – 240 ml
Milk foam: 0 sec. – 120 sec.
10 levels Coffee: 25 ml – 240 ml
Milk foam: 0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
Interval: 0 sec. – 60 sec.
10 levels Coffee: 15 ml – 80 ml
Milk foam: 0 sec. – 120 sec.
10 levels Coffee: 25 ml – 240 ml
Milk foam: 0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
10 levels Coffee: 25 ml – 200 ml
Bypass water:
0 ml – 200 ml
– Milk foam: 0 sec. – 120 sec.
– Water: 25 ml – 450 ml
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the coffee strength for one
espresso.
Precondition: The start screen is displayed.
4 Permanent settings in programming mode
More settings
Temperature (as for single
product),
product name
Milk foam temperature,
temperature (low, normal,
high), product name
Milk and milk foam tempera-
ture, temperature (low, normal,
high), product name
Milk foam temperature,
temperature (low, normal,
high), product name
Milk and milk foam tempera-
ture, temperature (low, normal,
high), product name
Temperature (low, normal,
high), product name,
number of strokes (1 – 5; set
number is displayed during
preparation)
Milk and milk foam
temperature, product name
Temperature (low, normal,
high), product name
25