Configuring Snmp; Table 119 Snmp Switch Traps - ZyXEL Communications XGS-4528F User Manual

Chapter 35 Access Control

Table 119 SNMP Switch Traps

OPTION OBJECT LABEL
stp STPNewRoot
MRSTPNewRoot
MSTPNewRoot
STPTopologyChange
MRSTPTopologyChange
MSTPTopologyChange
mactable MacTableFullEventOn
MacTableFullEventClear
rmon RmonRisingAlarm
RmonFallingAlarm

35.3.4 Configuring SNMP

From the Access Control screen, display the SNMP screen. You can click Access Control to
go back to the Access Control screen.
290
OBJECT ID
1.3.6.1.2.1.17.0.1
1.3.6.1.4.1.890.1.5.8.39.43.2.1 This trap is sent when the MRSTP
1.3.6.1.4.1.890.1.5.8.39.107.7
0.1
1.3.6.1.2.1.17.0.2
1.3.6.1.4.1.890.1.5.8.39.43.2.2 This trap is sent when the MRSTP
1.3.6.1.4.1.890.1.5.8.39.107.7
0.2
1.3.6.1.4.1.890.1.5.8.39.31.2.1 This trap is sent when more than
1.3.6.1.4.1.890.1.5.8.39.31.2.2 This trap is sent when less than 95%
1.3.6.1.4.1.890.1.5.1.1.16.0.1
1.3.6.1.4.1.890.1.5.1.1.16.0.2
DESCRIPTION
This trap is sent when the STP root
switch changes.
root switch changes.
This trap is sent when the MSTP root
switch changes.
This trap is sent when the STP
topology changes.
topology changes.
This trap is sent when the MSTP root
switch changes.
99% of the MAC table is used.
of the MAC table is used.
This trap is sent when a variable
goes over the RMON "rising"
threshold.
This trap is sent when the variable
falls below the RMON "falling"
threshold.
XGS-4528F User's Guide