Global Dhcp Relay Configuration Example; Figure 147 Global Dhcp Relay Network Example; Figure 148 Dhcp Relay Configuration Example - ZyXEL Communications XGS-4528F User Manual

Table 104 IP Application > DHCP > Global (continued)
LABEL
Apply
Cancel

32.4.3 Global DHCP Relay Configuration Example

The follow figure shows a network example where the Switch is used to relay DHCP requests
for the VLAN1 and VLAN2 domains. There is only one DHCP server that services the DHCP
clients in both domains.

Figure 147 Global DHCP Relay Network Example

DHCP Server:
192.168.1.100
Configure the DHCP Relay screen as shown. Make sure you select the Option 82 check box
to set the Switch to send additional information (such as the VLAN ID) together with the
DHCP requests to the DHCP server. This allows the DHCP server to assign the appropriate IP
address according to the VLAN ID.

Figure 148 DHCP Relay Configuration Example

XGS-4528F User's Guide
DESCRIPTION
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to begin configuring this screen afresh.
VLAN1
Chapter 32 DHCP
VLAN2
EXAMPLE
263