To Output Arbitrary Signals - Aktakom AWG-4152 User Manual

Channel
Load
Amplitude
Offset
Figure 5-10: The User Interface of Noise Signal

To Output Arbitrary Signals

Press button to call the user interface of Arbitrary signal, the Arbitrary waveform
parameters can be set by operating the Arbitrary setting menu on the right.
The menu items of Arbitrary waveform are: Frequency/Period, Amplitude/High Level,
Offset/Low Level, Built-in Waveform, Editable Waveform. You can operate the menu by
using the menu selection buttons on the right.
To set the Frequency/Period, Amplitude/High Level, Offset/Low Level, please refer to To
Output Sine Signals on page 12.
The Arbitrary signal consists of two types: the system built-in waveform and the
user-definable waveform.
Channel
Load
Amplitude
Offset
Built-in Exponential
Rise Waveform
Figure 5-11: The User Interface of Arbitrary Signal
5.Front Panel Operation
Noise waveform
Parameter 2
Parameter 1
Parameter 2
Parameter 3
Frequency
Parameter 3
18
Current signal
Setting menu
of Noise signal
Current signal
Setting menu of
Arbitrary signal