Table of Contents
Advertisement
⑩ CH2 Output
⑪ Foot stool
⑫ CH1 Output Control
⑬ CH1 Output
⑭ CH1/2 button
⑮ Modulation (Mod)
⑯ Both button
⑰ USB port
⑱ Waveform
selection
buttons
⑲ Power button
Rear Panel
⑧
4.Quick Start
when CH2 is tuned on.
Output signal of CH2
Make the instrument to be tilted for ease of operation
Turn on/off the output of CH1. The backlight will be lighted
when CH1 is tuned on.
Output signal of CH1
Switch channel displayed on the screen between CH1 and
CH2.
Generate the Modulated waveforms, Sweep and Burst; these
functions are only used for CH1.
Display the editable parameters of both channels. When the
function is enabled, the backlight of the button turns on.
Connect with an external USB device, such as connect a USB
device to the instrument.
Include: Sine
Noise
waveform is selected, the backlight of the button turns on.
Turn on/off the generator
⑨
⑩
⑦
⑥
⑤
Figure 4-2 Rear panel overview
, Square
, Ramp
and Arbitrary
①
④
③
6
, Pulse
waveform. When a
②
,
Advertisement
Table of Contents
