Table of Contents
Advertisement
the output signal is set to 2.5Vpp amplitude and 1.25V offset.
Channel
Load
Amplitude
Offset
Duty cycle
Figure 5-4: The User Interface of Square Signal
Term Explanation
Duty Cycle:
The percentage that the High Level takes up the whole Period.
To Set the Duty Cycle
(1) Press F4 button, the "Duty" menu item is highlighted, the current value of the
Duty cycle is displayed in Parameter 1.
(2) Turn the knob to change the value directly;
or press the number keys to input the desired value, press F4 to choose "%".
Figure 5-5: Set the Duty cycle of Square signal
5.Front Panel Operation
Parameter 1
Parameter 2
Frequency
Parameter 3
14
Current signal
Setting menu of
Square signal
Advertisement
Table of Contents
