Table of Contents
Advertisement
To set channels
To Switch Channels for Display
Press CH1/2 button to switch channel displayed on the screen between CH1 and CH2.
To Display/Edit Both Channels
Press Both button to display the parameters of both channels.
To switch channel: Press CH1/2 to switch the editable channel.
To select waveform: Press Waveform selection buttons to select waveform of current
channel.
To select parameter: Press F2 -
Press it again to switch the current parameter such as Frequency/Period.
To edit parameter: Turn the knob to change the value of cursor position. Press
direction key to move the cursor. (The number keys can not be used to input.)
CH1
Parameter 1
Parameter 2
Parameter 3
To Turn On/Off Output of Channels
Press CH1 or CH2 to turn on/off output of the corresponding channel. The indicator will
be lighted when the corresponding channel is tuned on.
Channel Copy
(1) In signal output interface, press the knob on the front panel to enter Channel Copy
menu.
(2) Press F1 to select From CH2 To CH1, or press F2 to select From CH1 To CH2.
5.Front Panel Operation
F5 to choose the Parameter 1 to Parameter 4;
Waveform
Figure 5-1: The User Interface of Both button
CH2
Waveform
11
/
Parameter 1
Parameter 2
Parameter 3
Parameter 4
Advertisement
Table of Contents
