Table of Contents
Advertisement
Connect the appliance to an efficiently earthed and correctly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
Setting up the appliance
Please note :
•
Coffee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of cof-
fee in the mill. The machine is, however, guaranteed to be
new.
•
You should customise water hardness as soon as possible
following the instructions in the section "Setting water
hardness" on page 19.
1. Insert the power cable connector into the socket at the back
of the appliance and connect the appliance to the mains
electricity supply (fig. 1). Make sure the main switch is
pressed (fig. 2).
2. Remove the water tank (fig. 3), open the lid (fig. 4), fill to
the MAX line with fresh water, replace the lid and put the
tank back in the appliance.
You must first choose the language by moving backwards and
forwards with the
until the languages scroll through on the display at intervals of
about 3 seconds:
3. When "English" appears, press and hold the
6) for a few seconds until "ENGLISH set" is displayed.
Follow the instructions indicated on the appliance display:
4. "INSERT WATER SPOUT": Check that the hot water spout
is inserted on the connection nozzle and place a container
holding a minimum of 100 ml underneath (fig. 7).
5. "HOT WATER Press OK" is displayed;
6. Press the
icon to confirm (fig. 6). The appliance deliv-
ers water from the spout then goes off automatically.
The coffee machine is now ready for normal use.
Please note :
•
When setting up the appliance, you need to make 4-5 cups
of coffee or 4-5 cappuccinos before the appliance starts to
give satisfactory results.
•
When making the first 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
•
To enjoy your coffee even more and improve the perfor-
mance of your appliance, we recommend installing a water
softener filter as described in the section "Water softener
filter" (page 20). If your model is not provided with a fil-
ter, you can request one from De'Longhi Customer Services.
or
arrows (fig. 5), or waiting
icon (fig.
TURNING THE APPLIANCE ON
Please note!
•
Before turning the appliance on, make sure the main
switch is pressed (fig. 2).
•
Each time the appliance is turned on, it performs an auto-
matic preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this
cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coffee spouts
and is collected in the drip tray underneath. Avoid contact with
splashes of water.
•
To turn the appliance on, press the
The message "Heating up, Please wait" is displayed.
When heating is complete, the message changes to "Rinsing". As
well as heating the boiler, this also heats the internal circuits by
circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coffee appears.
TURNING THE APPLIANCE OFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water flows from the coffee spouts.
Avoid contact with splashes of water.
•
To turn the appliance off, press the
•
The appliance performs a rinse cycle, then the message
"Turning off Please wait" is displayed and the appliance
goes off (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
•
first turn the appliance off by pressing the
(fig. 8);
•
press the main switch on the side of the appliance (fig. 2).
Important!
Never press the main switch while the appliance is on.
MENU SETTINGS
To access the settings menu, press the
through the menu by pressing
10
button (fig. 8).
button (fig. 8).
button
icon (B2). Scroll
or
(fig. 5).
Advertisement
Table of Contents
Troubleshooting
