Philco PLDSA 1263 Chiva User Manual page 60

Table of Contents

Advertisement

CHAPTER -9: TROUBLESHOOTING
FAULT
Unsatisfactory
washing result.
As soon as the ma-
chine is loaded with
water, water dis-
charges.
No water appears
in the drum during
washing.
Laundries have
detergent residues
on them.
Grey spots appear
on the laundries.
(**) See the chapter regarding installation of your machine.
POSSIBLE
CAUSE
Water being hard.
( Contaminated, lime
water etc.)
Laundries distributed
in your machine non-
homogenously.
The end of water
discharging hose
is too low for the
machine.
No fault. Water is
in the unseen part
of the drum.
Non-dissolving
particles of some
detergents may
stick to your
laundries as white
spots.
The reason for such
spots may be oil,
cream or ointment.
TROUBLE-
SHOOTING
Adjust the amount of
detergent based on the
instruction of detergent
manufacturer.
Spread your laun-
dries in the ma-
chine properly and
homogeneously.
Set the water dis-
charging hose on ap-
propriate height. (**)
Perform an extra
rinsing by setting your
machine to "Rinsing"
programme, or check
that there is not more
laundry than the
maximum possible fill.
For further washing,
adjust the amount of
detergent to be
dispensed.
Apply the maximum
amount of detergent
instructed by the deter-
gent manufacturer in the
next washing operation.
60

Advertisement

Table of Contents
loading

Table of Contents