CHAPTER -3: INSTALLATION
(WATER INLET HOSE CONNECTION)
• Ensure that the new water inlet hoses are not bent, bro-
ken, crushed and resized.
• If your machine has double hot water inlets, the tempera-
ture of hot water inlet should be maximum 70°C.
Note: Use only the new water inlet hose coming
with your machine while making Water inlet hose
connections of your machine. Never use old, used
or damaged water inlet hoses.
WATER DISCHARGE CONNECTION
The end of water discharge hose can be fittedto a specific
•
apparatu directly attached to dirty water discharge hole or outlet
joint of the basin elbow.
Never attempt to extend the water discharge hose by jointing.
•
Do not put discharging hose of your machine in a vessel, bucket
•
or sink.
Make sure that the water discharge hose does not bend, buckle,
•
be crushed or extended. Please note:
The water drain hose should be mountedat at a height of
•
minimum 60 cm, maximum 100 cm from the ground.
~ 95 cm
~ 145 cm
95 cm
˜
~ 140 cm
~ 95 cm
150 cm
˜
25