Unable To Feed The Media Properly; The Media Move Obliquely In The Machine During Cutting; Are The Media Or The Left Side Of The Cutting Mat Aligned With The Guiding Line; Position - Silhouette CAMEO5 User Manual

Table of Contents

Advertisement

4-2 Unable to feed the media properly

If the media cannot be fed into the machine properly (for example, they slip out of the roller during cutting),
check the following causes and solutions.

The media move obliquely in the machine during cutting

Are the media or the left side of the cutting mat aligned with the Guiding Line?

Align the left side of the media with the Guiding Line when loading.
Align the left edge of
the media with the
Guiding Line
Is the Pinch Roller Unit aligned with the media and set to the appropriate printing position?
Move the Pinch Roller Unit to the left and right, and check that it is set to the appropriate printing position
according to the media size.

Are the leading end of the media cut at a right angle?

Place a ruler against the media, and cut the leading end straight and at a right angle using a cutter knife or
similar tool.
Cut at a right angle or straight
Media
04 Troubleshooting
64

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cameo5 plusCameo5-um-151

Table of Contents