Removing Packaging Materials From The Machine - Silhouette CAMEO5 User Manual

1-2 Removing packaging materials from the machine

There are strips of tape and cushions to hold the moving parts of Silhouette CAMEO5/CAMEO5 PLUS in place
during shipment and prevent any damage to the machine.
Remove all of the packaging materials (strips of tape and cushions).
1
Remove the machine from the box.
Silhouette CAMEO5 alone weighs approximately 5 kg, and Silhouette CAMEO5 PLUS alone weighs
approximately 5.5 kg.
Open the package on a sturdy surface.
Attempting to work on unstable ground can cause the machine to fall and cause serious injury to
personnel.
2
Remove the strips of (blue) tape and cushions (2 pieces) that hold the parts for the machine in place.
3
Open the cover and remove the strips of (blue) tape, protective sheets (2 pieces), and cushions (5
pieces) that hold the parts in place.
Protective
sheet
Cushion
Cushion
Cushion
Pull out to the front
01 About Silhouette CAMEO5/CAMEO5 PLUS
Note
Cushion
Pull out from the back
Protective sheet
Cushion
Pull out to the top
11