Load Media-2 - Silhouette CAMEO5 User Manual

Load Media-2

Be sure to use the cutting mat when cutting media that are out of standard sizes.
Otherwise, it may damage the machine and the blade.
Depending on the media type and condition, if the media tend to warp or incline when using "Load Media-2",
load the media using "Load Media-1" instead.
1
Press and hold the Power Button for at least two seconds to start Silhouette CAMEO5.
2 Align the left edge of the media with the Guiding Line on the front panel.
Guiding Line
Note
Additional information
Power Button
02 Easy Operation Guide
44