The Media Slip Out Of The Pinch Roller; Loaded Straight - Silhouette CAMEO5 User Manual

The media slip out of the Pinch Roller

Is the leading end of the media butted against the Pinch Rollers on both sides and loaded
straight?
• Check the following points to ensure that the media are loaded straight correctly.
• Butt the leading end of the media against the Pinch Rollers on both sides.
• Hold the media so they do not move until the machine starts feeding.
Pinch Roller:
Hold the paper here and
feed it into the machine.
Pinch Roller Unit
04 Troubleshooting
Pinch Roller:
Hold the paper here and
feed it into the machine.
Pinch Roller Unit
65