Name And Functions Of Each Component; Silhouette Cameo5 - Silhouette CAMEO5 User Manual

1-3 Name and functions of each component

Silhouette CAMEO5

(5) Tool Holder
(4) Tool Carriage
(7) Pinch Roller Unit
(9) Guiding Line
(1) Power Button
Emergency Stop Button
(2) USB Interface
(3) Power Connector
(4) Tool Carriage
(5) Tool Holder
(6) Pinch Roller
(7) Pinch Roller Unit
(8) Auxiliary Roller
: Switches the power on or off.
: When the Power Button is pressed during the cutting operation, the operation
stops immediately.
: Used to connect the machine to the computer with a USB Interface cable.
: Connects the AC adapter.
: Part to drive the tool to the left and right.
: A holder to place tools, such as the Auto Blade or specialty tools.
Place the Auto Blade in Tool holder 1 and specialty tools in Tool holder 2.
: Roller to feed the media.
: Roller unit to feed the media. The pinch roller unit on the right side
determines the position based on the media size, lowers the lever, and
secures it.
: Holds the media down to prevent it from warping. The auxiliary roller can be
adjusted freely depending on the media size. We recommend positioning the
auxiliary rollers so that their left-right spacing are almost even taking account
into the width of the loaded media.
01 About Silhouette CAMEO5/CAMEO5 PLUS
(8) Auxiliary Roller
(6) Pinch Roller:
(3) Power Connector
(2) USB Interface
(1) Power Button
(7) Pinch Roller Unit
13