Silhouette CAMEO5 User Manual page 12

4 Remove the strips of (blue) tape and cushions (2 pieces) that hold the Tool Carriage in place.
After removing cushion (1), move the Tool Carriage slightly to the left, and remove the remaining
cushion (2).
When manually moving the Tool Carriage, do not hold the
Tool Holder with your hand.
Turn off the power, hold the part shown on the right, and
move it slowly.
Moving it too fast may cause a malfunction.
Cushion (2)
Cushion (1)
Tool Carriage
Note
01 About Silhouette CAMEO5/CAMEO5 PLUS
Tool Holder
Tool Carriage
12