Show Library Split Screen ....................................15 Silhouette Design Store ......................... 16 Download Designs ......................................17 Send Panel ..............................18 Prepare the Cameo Pro .......................... 19 Place Material on the Cutting Mat ................................19 Turn On the Cameo......................................19 Load the Tool ........................................20 Adjust the Sliders .......................................22...
What’s in the Box? The Silhouette Cameo® 4 Pro comes with the items shown in the following list. Check that all the items have been included before you proceed to use the machine. If you are missing any items listed below, please contact support@silhouetteamerica.com.
Silhouette Cameo® 4 Pro User Manual Remove Packaging from the Machine There are strips of tape, cardboard, and foam to hold the moving parts of the Cameo Pro in place during shipment to prevent any damage to the machine. Take the Silhouette Cameo® 4 Pro from the box and remove the strips of tape that are holding the lid and any machine pieces in place.
The first thing to do is create a Silhouette account, if necessary, and register your machine. Completing this step is what will allow you to access your 100 free designs in your Silhouette Library.
(Mac or Windows) and follow the prompts on your computer to finish the installation. The software is necessary to run your Cameo Pro cutting machine, so don’t forget this step! You’ll learn more about how to use the Silhouette Studio® software later in the manual. For now, finish the machine setup process.
The subscription you’ll be starting out with is the Basic tier, which means you get $25 of credits for the month. To claim your free 1-month subscription, start by going to the Silhouette Design Store. You can do this by opening a web browser and going to SilhouetteDesignStore.com...
To view your free designs, go to the Library tab in Silhouette Studio®. The software will prompt you to sign in to your Silhouette account if you haven’t already done so. Next go to the folders on the left-hand side. Click “Free with Machine”...
Now that you’ve downloaded Silhouette Studio®, it’s time to learn how to use it. To open Silhouette Studio®, locate the Silhouette Studio® icon on the desktop or in the Start Menu on your PC or in the Applications folder on your Mac. Double-click the icon to run the application.
Designs can be stored on your computer or in the Silhouette Library. Send The Send tab allows you to adjust the cut settings for your designs and send them to your Silhouette. This menu works similar to a Send to Print menu in other programs.
Silhouette Cameo® 4 Pro User Manual Design Area The Design area is the first area you’ll see when you open Silhouette Studio®, and it is the area you’ll likely spend most of the time in, so it’s important to learn how to use it to create your designs.
Drawing Tools Freehand Tools Text Tool Draw a Note Note: If you have other editions of Silhouette Studio® (e.g. Silhouette Studio® Designer Edition), Eraser Tool you may see more drawing tools than you see listed here. You can learn more about those tools in the Knife Tool Silhouette Studio®...
Silhouette Cameo® 4 Pro User Manual Text To cut letters or words using any font on your computer, choose the Text tool from the toolbar on the left-hand side of the screen. With the Text tool selected, click anywhere on the page and begin typing. The font will be a default font, but you can easily change this in the Text Style panel that pops up.
Silhouette Library. When you click on the Library tab, you may be asked to sign in to your Silhouette account if you haven’t already done so. Input your email address and password, and click “Sign In.” If you don’t already have a Silhouette account, you can click the “Sign up FREE”...
When you purchase designs from the Silhouette Design Store, those designs will show up in your Recent Downloads. From there, you can move the designs to different folders.
Search Library for Designs Designs that you purchase from the Silhouette Design Store have certain keywords associated with them, and this makes searching for a specific design simple. If you want to search for a design, open your library by clicking on the Library tab.
Show Library Split Screen To view your designs space and your Silhouette Library at the same time, you can use the Library Split Screen feature. To split the screen, you must go to the Design screen. Go to the bottom left of the screen and click the folder with the down-pointing arrow (otherwise known as the Library icon) or click the triangle pointing to the right.
Design Store regularly, and generally there is a free design posted every week. To access the Silhouette Design Store, click the Store tab in the upper-right corner of the software. This will open up a browser window and navigate you to the store.
Store will ask you to sign in before downloading your design. You should have already created a Silhouette account, but if you haven’t, creating a new account only takes a few seconds. Click the “Sign up FREE” link on the login page to create a new account.
For more advanced settings, you can use the Line panel, the Fill panel, or the Layer panel. With the Line Panel or the Fill panel, you can assign which task the Silhouette will do according to the image’s line color or fill color. If you have a...
Position your paper or other media on the cutting mat according to the illustration in Silhouette Studio®. Turn On the Cameo Turn the Silhouette Cameo® 4 Pro on by pressing the power button and waiting for the machine to start up. To feed the cutting mat into the machine Lift the lid and slide it back.
Load the Tool Choosing a tool or blade is an important step in preparing your Silhouette to cut. Since your machine comes with an AutoBlade, you can insert that. Different styles of blades are adjusted by different methods. Instructions for adjusting...
Page 23
Silhouette Cameo® 4 Pro User Manual Auto Tool Detection New to the Cameo Pro is Auto Tool Detection. This feature allows the software to detect what tool is inserted into the machine, and the software automatically populates action options in the Send panel.
Silhouette Cameo® 4 Pro User Manual Adjust the Sliders By adjusting the sliders on the main roller shaft, the Silhouette machine can accommodate the following media sizes: letter, A4, 12 inches, A3, 13 inches, 15 inches, 20 inches, and 24 inches.
1. Line up the left edge of the cutting mat or material with the gray line in front of the tool carriage and the left-hand grip on the roller bar. 2. Press the Load button on the Cameo Pro. The machine will immediately grip your cutting mat or material and move it into position underneath the roller bar.
Next select the tool or make sure the right tool is selected. With Auto Tool Detection, your machine should automatically detect which tool is in the tool holder. Here we’ve put two different tools in the Cameo Pro—the AutoBlade and the Sketch Pen tool adapter.
Silhouette Cameo® 4 Pro User Manual Cutting without a Mat (Kiss-cut) A kiss-cut is what is used when you are using cutting materials that have a backing (i.e., vinyl, heat transfer, sticker sheets, etc.). When you are performing a kiss-cut with the Cameo machines, there are two other features you may want to utilize: the roll feeder and the crosscutter.
Page 28
Use the Roll Feeder or Mat Support Below are the roll feeder pieces come with the Cameo Pro. In addition to those pieces, there is also a piece that you can use to support your cutting mat when you need it.
Page 29
Crosscutter Track Make sure to set things up in Silhouette Studio® so that your cut will feed through the Cameo properly. First, set your cutting mat to “None” in the Page Setup panel. Next when you go to the Send tab before you send your design, click the gear icon in the bottom right corner to open up the advanced settings.
Page 30
Silhouette Cameo® 4 Pro User Manual Replace the Crosscutter Cartridge If your crosscutter blade becomes dull and you need to replace it, you can do that easily by removing and replacing the crosscutter cartridge. To remove the crosscutter cartridge, press down on the top of the two end levers simultaneously. While doing that, pull the crosscutter cartridge out.
Because of a channel that runs under the blade area, the Cameo Pro can preform a special cutting action, which cuts all the way through the material even though there is not a cutting mat. It does this by lifting the blade in tiny segments as it cuts leaving part of the material connected to the full page.
In Silhouette Studio®, go to the Send tab. Click on the Bluetooth® icon at the bottom of the panel and select “Add Bluetooth® machine.” After a few seconds, the status of the Cameo will display as Ready in the Send panel, and the setup is complete.