Remove Packaging From The Machine - Silhouette CAMEO 4 User Manual

Silhouette Cameo® 4 User Manual

Remove Packaging from the Machine

There are strips of tape, cardboard, and foam to hold the moving parts of the Cameo in place during shipment to prevent
any damage to the machine.
Take the Silhouette Cameo® from the box and remove the strips of tape that are holding the lid and any machine pieces
in place.
Remove the three tabs that are holding the clear plastic covers in place on the front of the machine; you'll remove the
two pieces on the side panels and the piece along the top of the machine.
Next, lift the lid slightly and slide it back. Remove the tape, cardboard insert, and any foam pieces you see here.
Don't forget to remove the strip of tape on the back of the machine that is holding the crosscutter in place.
2