Kärcher K 6.310 Manual page 19

the maximum equipment. Depending
on the model, there are differences in
the scopes of delivery (see packaging).
Illustrations on fold-out
pages!
1 Coupling element for
water connection
2 Water connection with integrated sieve
3 Appliance switch "0/OFF"/ „I/ON"
4 High pressure hose
5 Dosage regulator for detergent
6 Storage for trigger gun
7 High-pressure hose drum
8 Transport handle
9 Hand crank for hose drum
10 Storage of detergent reservoir with de-
tergent connection
11 Storage for accessories
12 Option
Storage hook for mains connection ca-
ble
13 Option
Automatic coiling for mains cable
14 Mains cable with mains plug
15 Detergent reservoir with locking lid
16 Wheels
17 Trigger gun
18 Lock trigger gun
19 Key to detach the high-pressure hose
from the trigger gun
20 Washing brush
21 Spray lance with Dirtblaster
22 Spray lance with pressure regulation
(Vario Power)
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Install the storage for hand-spray gun
Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
lcoks in.
Illustration
Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
Option
Illustration
Install the top storage hook.
Install the dosage regulator for detergent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Install the transport handle
Illustration
Wind up the high-pressure hose on the
hose drum.
Illustration
Slide the free end of the coiled high
pressure hose through the recesses on
the dosage regulator.
Illustration
Attach the transport handle, insert the
bolts into the bores and screw them in.
Illustration
Press the connecting fitting from the
short high pressure hose into the brass
intake until it locks into place audibly.
Check the secure connection by pulling
on the high-pressure hose.
Connect the high pressure hose to the
hand spray gun
Illustration
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high-pressure hose.
- 8
EN 19