Pmr Features; One Touch Call - Hytera HP50X User Manual

User Manual

9. PMR Features

To pre-configure features in this chapter, contact your dealer.
9.1 Power Level
Power Level allows you to set the TX power level to high or low.
High: The radio can support long-distance communications while consuming more battery power.

Low: The radio can support short-distance communications while saving battery power.

To adjust the power level, press the preprogrammed Adjust Power Level key.
9.2 Scan
Scan allows you to listen to activities on other channels, keeping track of your team members.
To enable Scan, press the preprogrammed Scan key.
With Scan enabled, the radio scans according to the scan list, during which the LED indicator flashes orange slowly.
When detecting activities on a channel, the radio stays on the channel, during which the LED indicator glows green.
If you do not want to hear activities on the channel, press the preprogrammed Nuisance Temporary Delete
key to remove the channel from the scan list temporarily.

9.3 One Touch Call

One Touch Call allows you to quickly initiate a preset service by pressing the preprogrammed One Touch Call key.
You can choose any of the following preset services:
Channel Type
Analog channel Make a call to a 2-tone contact.

Digital channel

Service
Make a group call, a private call, or an
all call.
Send a quick text message or position
message to a private or group contact.
Press the preprogrammed One Touch Call key.
To make a call on a digital channel, you
must press and hold the PTT key after
pressing the preprogrammed One Touch
Call key.
19
PMR Features
Operation